Adjusting the settings of front, center ,rear speakers, and subwoofer connected. If the speaker setting is adjusted to �S�, the low range bass sound of the channel(s) is redirected to the subwoofer or the front channels and if the speaker setting is adjusted to �N�, the sound of the channel(s) is redirected to other channels.
Select the desired speaker setting.
3
SPEAKER MODE
Each time this button is pressed, one of 11 different speaker settings are selected and displayed for 8 seconds as follows; FL CS RS, FL CL RS, FL CL RL, FL CL RN, FL CS RL, FL CN RL, FL CS RN, FL CN RS, FS CS RS, FS CS RN and FS CN RS In the displays, F stands for Front, C for Center, R for Rear, L for Large, S for Small and N for None. When judging whether a speaker is Large or Small, please note that a standard large speaker has a cone size larger than 12 cm(5 inches). The following speaker settings cannot be selected. Front :Small, Center : Large and Rear : Large(FS-CL--RL) or Center : None and Rear : None(CN-RN) setting. Select the desired subwoofer setting.
2
Press the SPEAKER MODE button for more than 2 seconds to enter the frontcenter-rear speaker mode.
SPEAKER MODE
The front-center-rear speaker setting is displayed. When the 6 CH DIRECT is selected as input source or �ANALOG� is selected as signal input in the stereo mode, the speaker mode function is not available. Memorize the desired speaker setting while it is displayed.
MEMO/ENTER
4
5
SPEAKER MODE
Each time this button is pressed, the subwoofer setting changes and is displayed for 8 seconds as follows; The desired speaker setting is memorized and then it enters the subwoofer mode. If the speaker setting display disappears, start from step 2 above, again. SUB W(oofer) -- Y(es): When using a subwoofer. SUB W(oofer) -- N(o) : When not using a subwoofer. In case that the front speaker is set to �S�, the subwoofer is automatically set to �Y�. Memorize the subwoofer setting while it is displayed.
MEMO/ENTER
6
Checking the speaker setting
SPEAKER MODE
If the subwoofer setting display disappears, start from step 2 above, again.
Each time this button is pressed briefly, the frontcenter-rear speaker or subwoofer setting is displayed.
