Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 3 (kliknij aby zobaczyć)
READ THIS BEFORE OPERATING YOUR UNIT
FOR U.S.A. AND CANADA ............................... 120 V FOR OTHER COUNTRIES ....................... 110 V/220 V
FOR YOUR SAFETY Units shipped to the U.S.A. and Canada are designed for operation on 120 V AC only. Observe all safety precautions with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug.
FOR YOUR SAFETY Units shipped to countries other than the above countries are equipped with an AC voltage selector switch on the rear panel. Refer to the following paragraph for the proper setting of this switch. AC VOLTAGE SELECTION This unit operates on 110-220 V AC. The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance with the following direction.
CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.
FOR EUROPE AND AUSTRALIA ......... 230 V/240 V
FOR YOUR SAFETY Units shipped to Australia are designed for operation on 240 V AC only. To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. Improper extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installation is completely safe. For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician. PAN-EUROPEAN UNIFIED VOLTAGE All units are suitable for use on supplies 230-240 V AC.
AC voltage selector switch
AC 220 V
AC 110 V
Move switch lever to match your line voltage with a small screwdriver or other pointed tool.
