Manufacturers� codes for TV
Operating other manufacturers� products
By changing the transmittable signals, you can use the supplied remote control to operate other manufacturers� products. � Refer also to the manuals supplied with the other products. � To operate those components with the remote control, first you need to set the manufacturers� codes each for the TV, VCR, STB, and DVD player. � After replacing batteries of the remote control, set the manufacturers� codes again. � All the functions may not be assigned to the buttons in some equipment.
Manufacturer JVC Daewoo Grundig Panasonic Philips Samsung Sony Thomson
Initial setting: 01
Codes 01 03, 19, 20 02 06, 07 03 08, 09, 20 09, 10, 11, 12, 13 04, 05, 14, 15, 16, 17, 18
Manufacturers� codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
� Changing the transmittable signals for operating a TV
1 Press and hold STANDBY/ON 2 Press TV. 3 Enter the manufacturer�s code using buttons
TV/STB.
1 � 9, and 0.
See �Manufacturers� codes for TV� on the right.
4 Release STANDBY/ON
TV/STB.
Now, you can perform the following operations on the TV. TV VOLUME +/�: TV/VIDEO: Adjust the volume on the TV. Change the input mode (either TV or VIDEO).
After pressing TV, you can perform the following operations on the TV. STANDBY/ON TV/STB: CHANNEL +/�: 1 � 9, 0, 100+ (+10): Turn on or off the TV. Change the channel numbers. Select the channel numbers.
See the instructions supplied with the TV for details.
5 After pressing TV, try to operate your TV by
pressing STANDBY/ON
TV/STB.
When your TV turns on or off, you have entered the correct code. If more than one code is listed for your brand of TV, try each one until the correct one is entered.
38
