|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Basic operations
2 Select the source to play
On the front panel: Turn SOURCE SELECTOR until the source name you want appears on the display.
The source lamp corresponding to the selected source lights in red. � As you turn SOURCE SELECTOR, the source changes as follows:
ANALOG L S.WFR R AUTO SURR TUNED STEREO AUTO MUTING
1
22
3
DVR/DVD VCR DBS TV (SIRIUS*1) USB XM FM AM
(Back to the beginning)
MHz
Source lamps
DVR/DVD*2: Select this for the DVD recorder or DVD player. Select this for the VCR. Select this for the DBS tuner. Select this for the TV. Select this for the SIRIUS Satellite Radio. Select this for the PC component. Select this for the XM Satellite Radio. Select this for an FM broadcast. Select this for an AM broadcast. VCR* : DBS*2: TV*1,2: SIRIUS*1: USB: XM: FM: AM:
2
1 2
3
1 4 7 10
2 5 8 0
3 6 9 10
From the remote control: Press one of the source selecting buttons.
� For �FM� and �AM,� press FM/AM. Each time you press FM/AM, the mode alternates between �FM� and �AM.�
*1 Changing the source name of TV/SIRIUS input
On the front panel only: Press SET when �TV� is selected as the source.
� �ASSIGN SIRIUS� appears on the display for a while.
ANALOG L S.WFR R AUTO SURR
1 Turn on the power
Press STANDBY/ON (or AUDIO on the remote control).
The standby lamp goes off and the source lamp of the current source lights in red.
� When you change the source name to �TV,� press SET when �SIRIUS� is selected as the source. �ASSIGN TV� appears on the display for a while. NOTE When you change the source name to �SIRIUS,� you cannot select �TV� as the source.
Current source name appears.
ANALOG L S.WFR MHz R AUTO SURR TUNED STEREO AUTO MUTING
*2 Selecting the analog or digital input mode
You need to select the proper input mode according to the connection method (analog or digital) on pages 7 to 10. � In case of digital connection, you also need to select the correct digital input terminal. (See �Setting the digital input (DIGITAL IN) terminals�DIGITAL IN 1/2/3� on page 25.) � �DIGITAL AUTO� and �ANALOG� setting are memorized for each source.
To turn off the power (into standby)
Press STANDBY/ON (or AUDIO on the remote control) again. The standby lamp lights in red. NOTE A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.
12
|
|
|
> |
|
