JVC RXE100RSB
Instrukcja Serwisowa

18

EN

RECORDING Advanced Features
Fade/Wipe Effects
These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record�Standby mode.

EFFECT Button

1 2
Power Switch Recording Start/Stop Button

Set the Power Switch to �PRO.�. Press EFFECT repeatedly until the desired mode�s name and indication appear. They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The effect is reserved. Press the Recording Start/Stop Button to activate fadein/out or wipe-in/out. To cancel a fade or wipe, press EFFECT repeatedly until �OFF� appears. �OFF� is displayed for approx. 2 seconds and the fade/wipe standby mode is canceled.

3

3 4

FADER
Fades in/out to a black screen.

MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe)
A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the center.

SLIDE (Wipe)
A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

DOOR (Wipe)
Wipes in as the two halves of a black screen open to the left and right, revealing the scene, or wipes out and the black screen reappears from left and right to cover the scene.

CW:CORNER (Wipe)
NOTES: � Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out. � The screen becomes slightly reddish when the Fade/Wipe is used with Sepia ( pg. 19). Wipes in on a black screen from the upper right to the lower left corner, or wipes out from lower left to upper right, leaving a black screen.

WW:WINDOW (Wipe)
The next scene gradually wipes in from the center of the screen toward the corners, covering the previous scene.