|
|
|
Kto jest w sklepie?
Sklep przegląda 6043 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
80
EN
TROUBLESHOOTING (cont.)
POSSIBLE CAUSES
10. �The Squeeze mode is selected. �High Speed Recording is being attempted. 11. �The light source or the subject does not include white. Or there are various different light sources behind the subject. 12. �The subject is too bright with the flash set to �AUTO� or �AUTO �. �If blinks, the flash is being charged. �Multi-Analyser 4 or MultiAnalyser 9 is selected. �The camcorder is in the Record mode. �In the Menu Screen, �GAIN UP� is set to �OFF� or �P.AE/ EFFECT� is set to �TWILIGHT�. �The flash is pushed down.
SYMPTOM
10. Snapshot mode cannot be used.
CORRECTIVE ACTION
10. �Disengage the Squeeze mode ( pg. 32). �Do not use High Speed Recording ( pg. 28). 11. �Set �FLASH� to �ON� in the Menu Screen. Or find a white subject and compose your shot so that it also appears in the frame ( pg. 18, 20, 34). 12. �Set �FLASH� to �ON� in the Menu Screen ( pg. 34). �It can take up to 10 seconds to charge the flash. �Disengage Multi-Analyser 4 or Multi-Analyser 9 ( pg. 19). �Set the camcorder in the Record-Standby mode ( pg. 34). �Set �GAIN UP� to �AUTO � or �AGC� ( pg. 31) or disengage the �TWILIGHT� mode ( pg. 41). �Raise the flash using the FLASH OPEN Switch ( pg. 34). 13. �The subject should look straight toward the flash, especially the first flash. If the subject does not see the first flash, it will be difficult for Red-Eye Reduction to take place ( pg. 34). �The flash is effective for subjects at a distance of approx. 0.7 m to 2 m from the camcorder ( pg. 34). �Set �FLASH� to �AUTO � in the Menu Screen to display the Red-Eye Reduction indicator ( pg. 34). 14. �Raise the flash using the FLASH OPEN Switch ( pg. 34). �Do not cover the flash emission window. �Adjust the flash brightness to a larger value ( pg. 35). �The flash is effective for subjects at a distance of approx. 0.7 m to 2 m ( pg. 34). �Press the BACKLIGHT Button ( pg. 42).
11. The colour of Snapshot looks strange.
12. Although Snapshot is attempted, flash does not take place.
13. Although a Snapshot is taken with the flash, RedEye Reduction does not take place.
13. �The subject does not look straight toward the flash. �The subject does not look at the first flash, which is an important part of Red-Eye Reduction. �The camcorder is too far from the subject. ��FLASH� is not set to �AUTO � in the Menu Screen.
14. The image taken using Snapshot is too dark.
14. �The flash is pushed down. �The flash emission window is covered by fingers, etc.. �The flash brightness is set to produce a darker image (adjustment value: �3). �The camcorder is too far from the subject. �Shooting was performed under backlit conditions.
|
|
|
> |
|
