Using the Timer
To check the settings (when unit is off)
Y
Press [CLOCK/TIMER]. The settings are shown in the following order: Start time, Finish time Source Volume
Clock
To change the settings (when unit is on)
To change the times Do steps , , , and . To change the source or volume 1. Press [ PLAY/REC] to clear the timer indicator. 2. Make changes to the source or volume. 3. Do steps to .
PLAY
RE
FADER SLEEP
EQ ON
1
PGM
REC
ALL 1-REC ST
MONO
RANDOM
You can enjoy other sources after you have set the timer.
Turn the unit off before the timer�s start time. The play and record timers cannot be used together.
Y
The Sleep Timer
Remote control only Set the unit to stop and turn off after a certain time. While listening to a CD, a cassette, or the radio.
PLAY
RE
FADER SLEEP
EQ ON
Press [SLEEP] to select the time (in minutes).
Each time the button is pressed
1
PGM
REC
ALL 1-REC ST
MONO
RANDOM
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP OFF SLEEP 120
To cancel
Press [SLEEP] to select �SLEEP OFF�.
To check the remaining time
Timer
Press [SLEEP] once. The remaining time is shown for about 5 seconds.
To change the time.
Press [SLEEP] to select the new time. The sleep timer can be used in combination with the play and record timers. Make sure the unit is off before the play or record timer's set start time.
The Timer Fader
Remote control only Volume increases slowly to the set level when a timer turns the unit on and decreases slowly when the sleep timer turns the unit off.
Press [TIMER FADER] to display �
(All timers will be affected.) Press again to cancel.
�.
This feature does not affect record timer�s recordings.