WHIRLPOOL S100
Instrukcja Obsługi

Using Cooktop Cartridges
Cooktop cartridges, either conventional installed on either side of the range. coil, glass-ceramic or solid element, can be

To Install

Cartridges

1. If the grill element, grill-rocks or grates are in place, remove before installing a cooktop cartridge. Clean grill basin of any grease accumulation. (See page 21 for cleaning recommendations.) 2. To install any of the optional cooktop cartridges, first be sure control knobs are turned OFF. Position the cartridge terminal plug towards the terminal receptacle. This receptacle is located at the front of the left side and at the back of the right side of the range. 3. Slide the cartridge towards the receptacle until the cartridge terminal plug is completely engaged. 4. Lower the opposite end of the cartridge into the range top until it is flush with the surface. Your cooktop is now ready to use.

To Remove

Cartridges

1. Control knobs must be in the OFF position and the cartridge should be cool. 2. Lift up on the "tab" located on the cartridge until top of cartridge clears the opening on the range by about 2 inches. Lifting the cartridge too high while still engaged in the receptacle could damage the terminal plug. 3. To disengage terminal, hold cartridge by the sides and slide away from terminal receptacle. Lift out when fully unplugged. the

To Store

Cartridges

1. A storage tray, Model A350, is available and can be used for storing a cartridge. 2. Do not stack cartridges where they may fall or be damaged. Never store other materials on top of the glass-ceramic cartridges since this could damage or mar the surface. 11