With a screwdriver, unscrew the two masking plugs covering the holes on the left-hand side and refit them on the righthand side. Remove the door handles. To do this turn the pins anticlockwise by a 1/4 turn with a screwdriver and remove them. Turn the handles as shown in figures and refit them on the opposite side. Reinsert the pins and secure by turning them clockwise by a 1/4 turn. Unscrew the pin from the top hinge and refit it on the lefthand side. Remember to fit the washers. Slide the refrigerator compartment door onto the top pin. Insert the middle hinge into the bottom of the refrigerator compartment door. Remember to fit the washers. Fully screw up the middle hinge. Fit the freezer compartment door onto the middle hinge. Insert the bottom hinge into the bottom of the freezer compartment door. Fully screw up the bottom hinge. Refit ventilation grille (D) clipping it into place.