Reversing the door
The side at which the door hangs can be changed from the right side (factory supplied) to the left side, if the installation site requires. Warning! When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.
Procced as follow:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Remove the clip-in ventilation grille (D). Remove the bottom hinge (E) by unscrewing the fixing screws. Slide the bottom door off the centre hinge (H). Remove the centre hinge and slide the top door off pin (G); unscrew pin (G) and refit it on the opposite side. Remove the two plugs, to reveal the holes for the hinge pivots, and remount them on the other side. Refit the top door and the centre hinge (H) on the opposite side. Refit the bottom door. Using a 10 mm spanner, unscrew the hinge pin (E) and reassemble it on the opposite side of the hinge; Refit bottom hinge (E) on the opposite side, using the screws previously removed. Remove blanking cover (F) from ventilation grille (D) by pushing it in the direction of the arrow and refit it on the opposite side. Refit ventilation grille (D), clipping it into place.
E E F
F
