4 - Operating your refrigerator
How to use the features of your refrigerator
This section tells you how to make the most of the refrigerators many useful features and how to clean them. Usage Instructions: In order to correctly use the deli bin it should be located fully on the left or right or in a central position. This will align the multiflow vents with the ducting surfaces at the rear of the deli bin. One or both of the vents can be opened to allow cooler air to pass over foodstuffs stored in the deli.
Door storage bins (shelves)
Both the refrigerator and freezer have door storage bins. You can adjust the refrigerator bins to meet different storage needs. All the door bins are completely removable for cleaning. If you want to remove or adjust a bin, lift it over the support lugs on the inner door panel. Push the bin down over the support lugs to lock it in place.
Dairy compartment
You can use the Dairy compartment to store foods such as butter, margarine and cheeses. The compartment is slightly warmer than the rest of the refrigerator compartment. The air from these vents can be very cold, which is useful for the fast chilling of food and drinks. However, items may freeze if left near the vents. To prevent freezing, move items away from the vents after chilling. Cleaning: The sliding deli shelf can be removed for ease of cleaning. In order to do so a flexible locking mechanism has been incorporated into the rear shelf rail. � Remove Deli Bin � Remove the shelf assembly by pulling it past the stops. � Place the full assembly up side down on a flat surface. � Slide the sub frame to the left until it engages with the locking mechanism. � Pull the thumb tag away from the rail to disengage it. � Slide the sub frame past this and allow it to flex back into position. Clean the parts as required and allow to dry. To replace the sub frame repeat this procedure making sure to align the front lip on the front shelf recess.
ALL GLASS IS SAFETY GLASS. HOWEVER CAUTION SHOULD BE TAKEN WHEN REMOVING THE SHELF FOR REPOSITIONING OR FOR CLEANING. AS THE ASSEMBLY IS RELATIVELY HEAVY AND IF HELD IN THE VERTICAL POSITION (AS SHOWN) THE RUNNER ASSEMBLY MAY DROP DOWN. DO NOT REMOVE ANY SCREWS!
Crisper Bin Storing vegetables
You can use the crisper bin to store vegetables, fruit or small goods.You can change the humidity inside the bin by rotating the humidity control. You should store vegetables in the crisper bin remembering to set the humidity control to more humid.
Storing fruit & smallgoods
You can also store fruit in the crisper bin remembering to set the humidity control to less humid.
Crisper Bin and shelf removal
� Remove the crisper bin(s) by pulling forward, then up and forward. � Remove the crisper shelf by lifting the catches on the underside of the shelf and pulling the shelf forward. � Remove the glass (if fitted) by placing the shelf face down on a flat surface, then flexing the rear of the shelf backward to disengage the clips to allow the glass to drop out of the plastic frame. � To replace the glass, with the shelf face up and the glass correctly orientated, insert the front corners of the glass into the shelf frame, lie the glass down and gently push the back of the glass into the shelf until the tabs at the back of the shelf secure it in place.
Sliding Deli Shelf/ Bin (where fitted)
The sliding deli bin allows you to position the deli-bin in any position within the refrigerator. This allows you to conveniently locate it around stored food or to align it with the multi flow vents for direct cooling.
