MASTER
7. LOW BOOST Button
This switches the low boost effect on and off. When this is switched on, the low-frequency range is boosted.
15.POWER Switch
This switches the power on and off.
* Be sure to turn the MASTER VOLUME knob down to 0 whenever turning the power on or off. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
8. WIDE Button
This switches the wide effect on and off. When this is switched on, the sonic image extends beyond the SA-300�s speakers, providing an effect that seems to envelop the listener in sound.
9. LEVEL Indicator
This indicates the MASTER output level.
10. EQUALIZER
The SA-300 includes a 3-band equalizer.
LOW Knob
This adjusts the tone in the low-frequency range.
MIDDLE Knob
This adjusts the tone in the middle-frequency range.
HIGH Knob
This adjusts the tone in the high-frequency range.
11. PHONES Knob
This adjusts the headphone volume level.
12. Headphone Jack
Connect headphones here. * Be sure to turn the PHONES knob setting to 0 before connecting or disconnecting headphones. * The sound from the SA-300�s speakers is not muted when headphones are connected.
13. VOLUME Knob
This adjusts the overall volume output from the SA-300�s speakers.
14.SUBWOOFER ACTIVE Indicator
This lights when the subwoofer is connected to the SPEAKER jack. While the indicator is lit, the low-frequency response with the subwoofer (SA-300W) connected is modified accordingly.
