Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
Simple setup
STEP1
Stand
Setup
Sheet of feet
Lying down
Attach the feet to the base of the unit (left side when standing). Do not set up the unit upside down as this can cause malfunction. Logo to the left
This unit can be setup standing or lying down.
Prepare the unit as follows according to the setup you choose. Turn the unit off before changing the setup.
TUNER/AUX DVD
VOLUME
POWER OPEN/CLOSE
/I
Standing
Attach the stand to the unit. 1 Slot the stand onto the base of the unit with the thinner end to the front. Hole Hole for screw Projection Front Attach the feet inside the guides.
PL
D
TUNER/AUX
DVD
/
/
POWER
OPEN/CLOSE
/I
VOLUME DOWN UP
PHONES
Screw 2 Fix the stand in place with the screw. Flat-headed screwdriver
The display changes automatically to suit the setup you choose.
After setup, turn the unit on and check that the display is correct. If you set the unit up incorrectly, �SETTING ERROR/CHANGE SETTING� flashes on the unit�s display.
STEP2
Locating
�Use only supplied speakers
Using other speakers can damage the unit and sound quality will be negatively affected. �Set the speakers up on an even surface to prevent them from falling. Take proper precautions to prevent the speakers from falling if you cannot set them up on an even surface. �Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate. �Use the speakers with the short cords (SB-FDM3) for the front and center, and the ones with the long cords (SB-RDM3) for the surround speakers. Main unit
Center speaker (5) SB-FDM3
�You can also put this speaker directly under the television. �Do not place the center speaker on the main unit as sound quality will be affected. �Vibration caused by the center speaker can disrupt the picture if it is placed directly on the television. Put the center speaker on a rack or shelf.
30 �
Note Keep your speakers at least 10 mm (13/32q) away from the system for proper ventilation. Leave 30-mm (13�16q) clearance at the rear of the unit.
Subwoofer (6) SB-WDM3
Place near the television, on the floor or a sturdy shelf so that it won�t cause vibration. �A woofer unit is located on the side of the subwoofer. Leave 10-cm (4q) clearance for it to be effective.
30 �
DOWN UP
PHONES
PL D
/
120�
Front speakers [Left (1)/Right (2)] SB-FDM3
Surround speakers [Left (3)/Right (4)] SB-RDM3
Place either side of the seating position, or slightly to the rear, about 1 meter (3 feet) higher than ear level.
Positioning for best effect
How you set up your speakers can affect the bass and the sound field. Note the following points. �Place speakers on flat secure bases. �Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtain.