Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 18 (kliknij aby zobaczyć)
RQTV0105
Other settings
MENU SETUP RETURN
TUNE
ENTER
POWER
MENU SETUP RETURN
TUNE ENTER
SURROUND MUSIC
INPUT SELECTOR
VOLUME
MUSIC PORT
Setting descriptions
A INPUT MODE (Input mode)
Changing the settings
1. Press and hold [�SETUP] to enter the setup menu. 2. Press [TUNE - or +] to select the item you want to change � [ENTER]. 3. Change the settings.
A INPUT MODE
This unit automatically detects whether input is digital or analog, but you can �x the input mode. AUTO: The unit automatically detects whether input is digital or analog. ANALOG: Select to make the unit accept analog input. DIG: Select to make the unit accept digital input. PCMFIX1: Select to input to PCM.
B DRCOMP (Dynamic range compression)
1. Press [TUNE - or +] to select "TV" or "DVR" � [ENTER]. 2. Press [TUNE - or +] to change the setting. The display changes as follows: AUTO � ANALOG � DIG � PCMFIX
B DRCOMP
Change this setting to listen to software recorded with Dolby Digital at low volume (such as late at night) and maintain audio clarity. It reduces the peak level in loud scenes without affecting the sound �eld. OFF: The software is played with the original dynamic range (factory setting). STANDARD: The level recommended by the producer of the software for household viewing. MAX: The maximum allowable compression (recommended for night viewing).
C ATTENUATOR (A/D Attenuator)
Press [TUNE - or +] to select "OFF", "STANDARD" or "MAX".
C
ATTENUATOR Press [TUNE - or +] to select "OFF" or "ON".
D DTS-PCM
Press [TUNE - or +] to select "NO" or "YES".
4. Press [RETURN] repeatedly until "EXIT" appears � [ENTER].
Turn the A/D attenuator on if "OVERFLOW" lights frequently when using 2-channel analog input.
D DTS-PCM
Other settings
If you are playing a DTS CD that contains both DTS and PCM, but it isn't playing properly, then select "YES". If this causes noise to occur, return the setting to "NO". (This setting is effective for each digital source.)
1
In rare cases, the unit may have trouble recognizing PCM signals and this may cause the beginnings of tracks to be cut off.
Select �PCMFIX� if this occurs. � With DTS, the signals may not be recognized at all. Engage the DTS FIX mode if this occurs. To engage the DTS FIX mode: Press and hold [-MENU] and [ENTER] at the same time. "DTS" lights. To cancel the DTS FIX mode: Press and hold [-MENU] and [ENTER] at the same time. The mode cancels when input mode is set to AUTO or when the unit is turned off.
18
When a FIX mode is on, the unit cannot process other signals. This may cause noise to be output. If this occurs, select an input mode other than PCMFIX, or cancel the DTS FIX mode.
