Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 59 (kliknij aby zobaczyć)
Fig. 19-1
19.1.4.2. Tips
1. Apply the tangential adjustment first and then the tilt adjustment. 2. Repeat the adjustment a couple of times to find the optimum point. 3. Complete with the tilt adjustment.
19.1.4.3. Check After Adjustment Replay test discs or other commercial discs in order to confirm that no picture deterioration or sound skipping is detected in the inner, middle, and outer tracks. After this, fasten each adjustment screw securely using a screw lock. 19.1.4.4. Procedure for Screw Lock
1. After adjustment, remove the top cover, clamper base, disc tray and then traverse unit. 2. Place the traverse unit upside down, and fasten the adjustment screws with a screw lock. <Fig. 19-2> 3. After fastening the screws, assemble in order of the traverse unit,