...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 66 (kliknij aby zobaczyć)
Setting Up Your Digital Satellite Receiver (SYSTEM) (continued)
Selecting an Antenna Type
The Antenna Type display lets you or your professional installer enter which type of Satellite Dish Antenna you use. After you have entered your antenna type, you can use the Antenna Location pop-up to help aim your antenna.
1
Highlight and select �Antenna Type� from the Antenna Display.
The Antenna Type display appears.
2
Highlight and select the Satellite Dish Antenna type that you have installed.
The SignalSeeker pop-up appears if you have selected �Round�. Skip to step 4 if you selected �Oval 2-Sat� or �Oval 3-Sat�.
3
z Tip
Selecting �off� in the SignalSeeker pop-up may allow you to see the Signal Strength Meter if you use a diplexer or certain other accessories with your Satellite Dish Antenna.
Highlight and select �On� if you selected �Round�.
The SignalSeeker pop-up closes to show the Antenna Type display.
Note
The SignalSeeker feature is available only with the Round Antenna. Refer to your Satellite Dish Antenna Installation Instructions for more information about this feature.
4
Select �Return�.
The Antenna Type display closes to show the Antenna display.
