PANASONIC SA-PT150E
Instrukcja Serwisowa

SA-PT150E / SA-PT150EB / SA-PT150EG

Step 2 Raise the mecha chassis vertically. Step 3 Slide the lever in the arrow direction till it stops and pull the tray out.

l(Assembly of the tray unit) Step 1 Insert a part of the tray into the unit sliding over the groove on the mecha chassis. Step 2 Insert the tray to the point before the tab of the mecha chassis.

Step 4 Spread the tabs at the both sides and pull the tray out. (The tray slides a little forword and stops.).

Step 3 Hook the drive arm concave phase over the tray and the tray slider. Step 4 Press in the tray. Step 5 Make sure that the tray and the drive arm move smoothly.

Step 5 Remove the drive arm concave phase from the tray slider and tray.

46