Congratulations! The product you have just purchased offers you exceptionally high quality reception. Please read the following instructions before using the indoor aerial, and retain this booklet for future reference. (See also the illustration on page 15.)
Universal amplified indoor aerial SBC TT300
POWER
12VDC
ANT. EXT
TV
GB Instructions for use
� Connect the cable of the aerial to the television aerial socket. If there is a video recorder already installed, connect the cable of the aerial to the aerial socket of the video recorder. � If there is a cable network connection in use, disconnect this cable from the television set or the video recorder, and connect it to the socket on the back of the aerial (ANT. EXT). � Connect the mains lead of the aerial to a 230-240 VAC mains socket. Note: the aerial is also fitted with a 12 VDC supply socket for use in caravans, campers, boats, etc. � Switch the ON/OFF button on the aerial to ON. The red indicator lights up, which means that the aerial is now operational. � Tune in the different television channels using the Instructions for Use of your TV. Turn the aerial around until optimum reception is obtained (UHF). � In certain areas with vertical polarized broadcasting, optimal reception can be achieved by turning the dipole (see fig. 1). � To obtain the best reception for VHF signals, vary the length and angle of the telescopic aerial.
TV
1
Notes This aerial is powered once it is connected to a 230-240 VAC mains supply. To disconnect the aerial from the mains supply remove the power plug from the mains socket. The base of the aerial has four rubber pads which provide stability and which are ideal for all surfaces. The label containing technical data can be found at the base of the aerial. Technical features � Gain (aerial + amplifier): UHF 30 ±2dB, VHF 20 ±2dB � Power supply: 230-240 VAC 50-60 Hz 12 VDC for use in caravans, campers, boats etc. � Power consumption: 3VA � Impedance: 75 Ohms � VDE approved � Safety regulations according to EN 60065
230/240V
TV
