MAINTENANCE
Checking the throttle cable
Remove the upper guard plate and check that the throttle cable is affixed and does not bind.
8011-113
Adjusting chain tension
Upper chain � Does not require adjustment. Check that the lever for automatic chain tensioning is not binding.
Lower chain 1. 2. 3. Undo the two rear screws for the skid pan and fold it downward. Tilt the sod cutter forward so that it is resting on the front weight. Turn the 1/2" locking nuts on the chain adjuster until the chain deflects about 6 mm at midspan. Fit the skid pan. Tilt the sod cutter back upright.
8011-117
4. 5.
Checking the chassis, fittings and screw torque
Check that the chassis and fittings are intact with no rust, cracks or other defects. Check also that all screws are tightened properly.
Checking the depth settings
Check that the depth setting knob affects the blade and that the depth lock knob locks the cutting depth in the desired position.
