Discs (Continued)
NOTE on CDs
� This unit can access up to 99 tracks. � Choose disc with this mark.
Limitations on MP3 or WMA play
� If you have recorded MP3 or WMA on the same disc as CD-DA, only the format recorded in the �rst session can be played. � Some MP3 or WMA may not be played due to the condition of the disc or recording. � Due to differences and variations of WMA tags, some �les may not play or display the tags� information properly. � Recordings will not necessarily be played in the order you recorded them.
� This unit can play MP3 or WMA �les and CD-DA format audio CD-R/RW that have been �nalized. � It may not be able to play some CD-R/RW due to the condition of the recording. � Do not use irregularly shaped disc. � Do not use disc with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. � Do not attach extra labels or stickers on the disc. � Do not write anything on the disc.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. WMA is a compression format developed by Microsoft Corporation. It achieves the same sound quality as MP3 with a �le size that is smaller than that of MP3.
Using DualDiscs
The �CD� sides of DualDiscs do not meet the CD-DA standard so it may not be possible to play them on this unit. Not doing the following will cause damage to the unit.
Removing the power plug
� Press [y/I, POWER] to turn off the unit and then remove the power plug only after all the displays have disappeared.
Tray caution
Cassette tape � Play and record
� Always press [0, OPEN/CLOSE] to insert or remove a disc. � Do not push or pull out the tray by hand as this will cause an accident.
Inserting a disc
� Place the disc correctly label-up as shown in the diagram. � Insert one disc into the tray.
Numeric buttons
NOTE on MP3 or WMA
� Files are treated as tracks and folders are treated as albums. � This unit can access up to 999 tracks, 255 albums and 20 sessions. � Disc must conform to ISO9660 level 1 or 2 (except for extended formats). � To play in a certain order, pre�x the folder and �le names with 3-digits numbers in the order you want to play them. When �NOT MP3/ERROR1� appears on the display, an unsupported MP3 format is being played. The unit will skip that track and play the next one. � Noise may occur when playing WMA �les. � This unit cannot play WMA �les that are copy protected.
The buttons described for �Cassette tape � Play and record� are mainly for the main unit unless indicated otherwise.
Basic play
You can use either DECK 1 or DECK 2 for tape playback. Use normal position tapes. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. 1 Press [3, TAPE]. The unit turns on. If a cassette was loaded, play starts automatically (One touch play).
