PANASONIC SCHT940
Instrukcja Obsługi

STEP1 Assembling the front speakers

The supplied stands are specially designed for attachment to Panasonic SB-FS740 or SB-FS940 front speakers. Use only as indicated in this setup.

Preparation � To prevent damage or scratches, lay down a soft cloth and perform assembly on it. � For assembly, use a Phillips-head screwdriver. � Make sure you have all the indicated components before starting assembly, setup, and connection. � There is no difference between the right and left speakers and stands. � For optional wall mount, refer to page 6.

[HT740] [HT743]
2 Front speakers (with cover plate) 2 Stands (with cable) 2 Bases 8 Screws

1

Attach the stand to the base.
1 Thread the speaker cable through the base. For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base. Cable

3

Attach the speaker to the stand.
1 Pull out the end of the speaker cable and position it between the ridges. Ridges

Cable Stand 2 Attach the speaker to the stand. Speaker Cover plate Remove before attaching the speaker and keep for wall-mount use (� page 6).

Assembling the front speakers Simple Setup

Base

2 Attach the stand to the base while gently pulling on the end of the speaker cable.

Stand Stand

4

Secure the speaker to the stand.
Speaker

Base Screw Tighten securely. Ensure the speaker cable is centered in the groove.

Cable Pull gently.

Stand

2

Secure the stand to the base.
Screw Tighten securely. Stand

5

Connect the speaker cable.
Insert the wire fully.

_: White `: Blue
Push!

Base
RQT8582

Slide the speaker cable into the groove. Screws Tighten securely.

Press the speaker cable into the groove.

4