JBL SCS145.5S
Instrukcja Serwisowa

SCS135/SCS135SI/SCS136SI/SCS145.5S OPERATION
Move the Master Power switch (marked �Power� ¡) to the ��� (On) position to use the subwoofer. The subwoofer will automatically turn on or go into standby (sleep) mode when left in the auto mode (�Auto/On� switch � in the �Auto� position). When your receiver or amplifier is off, or is not sending program material to the subwoofer, the subwoofer will be in standby mode (LED will be red). When the subwoofer senses an audio signal, it will automatically turn on (LED will be green). If the subwoofer does not sense a signal after approximately twenty minutes, it will automatically go back into standby mode. When the �Auto/On� switch � is switched to the �On� position, the subwoofer will remain on, whether or not program material is playing. If you will be away from home for an extended period of time, or if the subwoofer will not be used, switch the Master Power switch ¡ to the Off position.

HIGH LEVEL +L� �R+ OUT

LINE LEVEL IN
L

SUBWOOFER LEVEL
AUTO ON MIN
GREEN: ON RED: STANDBY

� £

LFE IN
IMPORTANT: CONNECT STRIPED WIRE TO RED ( + ) SPEAKER TERMINAL.

R

MAX

POWER

¡
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

AC 120V~60Hz

VOLUME Subwoofer Level

Volume may be adjusted using the Subwoofer Level control £ as shown.

MIN

MAX

Subwoofer Level

MIN

MAX

6