TOSHIBA SD2050
Instrukcja Serwisowa

1-4-2. Tray Mounting <The First Tray 1 Mounting> 1. Mount the first tray 1 by fitting to the bosses at two locations after sliding the upper wing to the inner side. 2. Slide the first tray 1 to front side (arrow A direction) until it stops.
Upper wing (mounted with the first tray 1 .) Upper side

<Tray mounting> 1. Remove the gear (1). 2. Insert the tray (2) horizontally. 3. Set the gear (1) to fit the rack gear of the tray. 4. Insert the tray (2) to the inner side until it stops. 5. Turn the gear (3) to confirm the movement.
Rack gear of tray

Lower side Lower wing Boss Upper wing

First tray 1 Label of first tray

Gear (1)

Gear (1)

1

A

Lower wing

Tray (2)

Gear (3)

Fig. 2-1-25 <The Second Tray 2 Mounting> 1. Insert the second tray 2 along the lower groove. 2. Turn the gear clockwise until it stops and descend the tray.
Insert along the lower groove. Tray

Fig. 2-1-27

2

Gear

Second tray 2

Fig. 2-1-26