One-touch Timer Recording (OTR)
The one-touch timer recording feature provides a simple and convenient way to make a timed recording. Preparation � Turn ON the TV and set to the AV input mode. � Press VCR to select the VCR mode. (The VCR indicator will light.)
1
Load a blank cassette tape with the erase prevention tab intact. (The DVD/VCR will automatically turn on.)
8+4
2 Select the program(e.g.29) you want to record with CH +/� or
number buttons. 1~9 : e.g. 5 = press �5� 10~80 : e.g. 29 = press �2� and �9�.
VCR
3 If a recording in Long Play mode
is intended, press SP/LP to display "LP".
00:00:00 LP
4 Press REC/OTR twice. The recording will start will increase the and stop after 30 minutes. Each additional press of REC/OTR
recording time to a maximum of 6 hours .
Recording 6:00 5:00 0:30 4:00
VCR REC
1:00 3:00
1:30 2:00
OTR 0:30 CH 29
INDEX
�REC� will keep blinking in the display.
If REC/OTR is pressed once during the recording, the remaining time appears on the screen. When pressed again, the recording time is extended to the nearest 30-minute or 1-hour interval.
To Extend the Recording Time
Press REC/OTR repeatedly until the desired time appears on the screen.
OTR 1 : 30 CH 29
Note: If the tape supply has not sufficed for OTR recording, the clock symbol ( ) will blink at the tape-end and then VCR mode will change to DVD mode. In this case, press TIMER REC to cancel the blink or press EJECT on the DVD/ VCR to remove the cassette tape.
