TOSHIBA SD3860SC
Instrukcja Serwisowa

DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS
1-1: TOP CABINET/FRONT CABINET (Refer to Fig. 1-1) 1. 2. 3. 4. Remove the 5 screws 1. Remove the Top Cabinet in the direction of arrow (A). Unlock the 4 supports 2. Remove the Front Cabinet in the direction of arrow (B).
Top Cabinet

1-3: DVD DECK (Refer to Fig. 1-3) 1. Make the short circuit on the position as shown Fig. 1-3 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be damaged. 2. Disconnect the following connectors: (CP2601, CP2602, CP2603). 3. Remove the 4 screws 1. 4. Remove the DVD Deck in the direction of arrow.
1 1 1
Pick Up PCB

1 1
DVD Deck

1

1
Front Cabinet (A)

1
Make the short circuit using a soldering.

1 2
(B)

2 2 2

Fig. 1-1 Fig. 1-3 1-2: POWER PCB (Refer to Fig. 1-2) 1. Disconnect the following connectors: (CP4001, CP4002). 2. Remove the 3 screws 1. 3. Remove the Power PCB in the direction of arrow.
1 1 1
Power PCB

NOTE When the installation of the DVD Deck, remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector. 1-4: DVD PCB (Refer to Fig. 1-4) 1. Remove the 4 screws 1. 2. Remove the 3 screws 2. 3. Remove the DVD PCB in the direction of arrow.
2
DVD PCB

2

2

11

1 1

Fig. 1-2

Fig. 1-4

B1-1