Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
Searching for a particular �rst letter
1 2 Press Mute/Search (or Search). Press the button labelled with the letter you want to search for.
� For example, if you want to �nd the name �NEW YORK�, press the �6� button, which is labelled with �MNO�. � The machine �nds the closest entry so you may need to specify as clearly as you can. � If the machine cannot �nd a name that begins with the given letter, the machine shows the message Not Found.
3
When the name and number you want appears correctly in the display, press Start/Enter to dial.
Redialling
You can redial the number last called or one of ten unique numbers recently stored in memory.
To redial the last number called
1 Press Redial/Pause.
� The number is dialled automatically. � If a document is loaded, the machine automatically begins to send. If there is no number stored, the machine will beep.
2
Speak into the microphone when the call is answered.
� Pick up the handset, if you are an SF-330 or an SF-331P user.
To redial the number in memory
1 2 Press and hold Redial/Pause for about two seconds. Select Recent
Numbers and press Start/Enter.
� The display shows the most recent numbers.
3 4
Press < or > to �nd the number you are dialling. Press Start/Enter when the correct number appears.
� If a document is loaded, the machine automatically begins to send.
To �nd a number received via the Caller ID service
You sometimes need to see who has called you. To see the number or name follow the instructions below: 1 2 3 Press and hold Redial/Pause for about two seconds. Select Caller
ID and press Start/Enter.
Scroll through the numbers by pressing < or >.
� The Caller ID displays in two ways. One is by name and other is by number. If the number is the same as the one you saved to a One-Touch or Speed dial location and you assigned a name to that location, the machine shows the name instead of the number.
