SHARP SFS54
Instrukcja Serwisowa

Install the staple cartridge in the stapler unit. Push the cartridge in until it clicks into place. Close the sorter front cover.

3. Close the sorter front cover, and remove the paper.
After removing the staple cartridge, close the sorter front cover.

Next, remove all the paper from the sort bins.

If staples jam:

�

If staples jam inside the staple cartridge, the staple lamp will light up.

1. Open the sorter front cover.

4. Install the new staple cartridge.
Before installing the new staple cartridge in the stapler unit, make sure that the tips of the staples are flush with the indicator line on the cartridge.

2. Remove the staple cartridge.
staple cartridge from the stapler unit.

Push up the stapler unit�s cartridge release lever, and remove the

� �

If they are not, pull the staples outward until they are. If they protrude beyond the indicator lines, cut them back so that they are flush with the lines.

1 2

Indicator line

2�5