Tones
Tones
: to delete notes. : to move a note to the next semitone higher position or lower position in the musical scale. For example, the note A moves A#, B, C, C# in the scale each time you press . : to adjust a length of a note. Enter a note, then press . Notice that the note length changes each time you press the key. You can listen to your melody by pressing the Listen soft key. If you are satisfied, press the Yes soft key, and enter the melody name. For information on how to enter a name, refer to page 42.
Note: If you want to cancel your composing, press . The display goes back to the previous menu level, the screen displays Empty.
Ring Volume
Menu 4-3
Allows you to adjust the ringing volume to one of five levels. Use the volume keys on the left side of the phone or the or keys. The greater the number of bars, the greater the volume level.
Alert Type
Menu 4-4
Allows you to indicate how you are to be informed of any incoming calls. The following options are available. Light only: only the backlight is switched on; the phone neither rings nor vibrates. Melody: the phone rings using the ringing tone selected via menu option 4-1. Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone both rings and vibrates.
Note: Pressing and holding down toggles between the current alert type and Vibration.
After you save the melody, the display asks you if you want to set the melody as the ring tone. If you select Yes, your phone plays the melody each time your phone rings. If you select No, the melody is just saved and the phone returns to the idle mode. To Delete a Selected Melody 1. Select the melody you want to delete. 2. Press and hold will be erased. for a few seconds. All notes
3. Press the Listen soft key. The display asks you if you are sure you want to erase the melody. Select the Yes soft key.
74 75
