Module No. 2320/2321/2325
GENERAL GUIDE
� Press A to change from mode to mode. Timekeeping Mode Calendar Mode Dual Time Mode Stopwatch Mode
ABOUT THE BACKLIGHT (MODULES 2321 AND 2325)
� Hold down L to illuminate the display for about 2 seconds. The backlight is disabled while an input screen (with a flashing setting) is on the display. � The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use. � Frequent use of the backlight shortens the battery life. � The watch emits an audible sound whenever the display is illuminated. This does not indicate malfunction of the watch. � The illumination provided by the backlight may be hard to see when viewed under direct sunlight. � The backlight automatically turns off whenever an alarm sounds. � When the backlight is turned on, it blinks whenever the minute hand moves. This is normal, and does not indicate malfunction of the watch.
1. Hold down B until the month digits start to flash. 2. Press A to increase the month digits. Holding down A changes the digits at high speed. 3. Press B to move the selection to day digits. 4. Press A to increase the day digits. Holding down A changes the digits at high speed. 5. Press B to move the selection to the day of the week indication. 6. Press A to advance to the next day. Holding down A changes the indication at high speed. 7. Press B to complete the procedure. � If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Calendar Mode automatically.
DUAL TIME MODE TIMEKEEPING MODE
� Use this mode to set the current time. An incorrect time setting will result in incorrect operation of the calendar.
To set the time and date
Hour Minutes 12/24
Hour Seconds Minutes
Seconds 12/24 Hour Minutes
To set the Dual Time
1. Hold down B until the hour digits start to flash. 2. Press A to increase the hour digits. Holding down A changes the digits at high speed. B 3. Press B to move the selection to the minutes digits. 4. Press A to increase the minutes digits. Holding down A changes the digits at high speed. 5. Press B to move the selection to 12/24. 6. Press A to toggle the timekeeping format between 12-hour and 24-hour. 7. Press B to complete the procedure. � If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Dual Time Mode automatically. � In the Dual Time Mode, the seconds count is synchronized with the seconds count of the Timekeeping Mode.
Hour Seconds Minutes
1. Hold down B until the seconds digits start to flash. 2. Press A to reset the seconds to 00. If you press A while the seconds count is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the minutes count is unchanged. 3. Press B to move the selection to the hour digits. 4. Press A to increase the hour digits. Holding down A changes the hour digits at high speed. 5. Press B to move the selection to the minutes digits. 6. Press A to increase the minutes digits. Holding down A changes the minutes digits at high speed. 7. Press B to move the selection to 12/24. 8. Press A to toggle the timekeeping format between 12-hour and 24-hour. 9. Press B to complete the procedure. � If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically.
STOPWATCH MODE
The stopwatch Mode lets you measure elapsed time. The range of the stopwatch is 59 minutes 59.99 seconds.
To set the hands
When in any Mode, press H with a thin object to advance the analog time setting. Each press of H advances the time by 20 seconds. Three presses advance by one minute. Holding down H advances the analog setting at high speed. You can only advance the setting and cannot reverse it.
Minutes 1/100 second
To use the Stopwatch
1. Press B to start the stopwatch. 2. Press B to stop the time measurement. � You can press B as many times as you want to resume and stop timing. 3. After you are finished using the stopwatch, hold down B to clear the stopwatch time to all zeros.
Seconds
CALENDAR MODE
� This is the normal mode for this watch.
