Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
Getting to Know Your Speaker Package
Subwoofer (SKW-320X)
I Rear
OUTPUT LEVEL
LINE INPUT
MIN
MAX
RED : STANDBY GREEN : ON
21 1 STANDBY/ON indicator
Red: Subwoofer in standby mode Green: Subwoofer on
3
To AC outlet
With the Auto Standby function, the SKW-320X automatically turns on when an input signal is detected in Standby mode. When there�s no input signal for a while, the SKW-320X automatically enters Standby mode.
2 OUTPUT LEVEL control
This control is used to adjust the volume of the subwoofer.
3 LINE INPUT
This RCA input should be connected to the subwoofer preout on your AV receiver, or other receiver with supplied RCA cable. Note: The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver or amp.
Front, Center & Surround Speakers (SKF-320F, SKC-320C, SKM-320S)
I Rear
2
1 1 Speaker terminals
These push terminals are for connecting the speaker to your HT-R320, or other receiver with the supplied speaker cables. The supplied speaker cables are color-coded for easy identi�cation. Simply connect each cable to the same colored positive speaker terminal.
2 Keyhole slot
These keyhole slots can be used to wall-mount the speaker.
