Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Using the Surface Burners
Surface Burner Indicators
The solid dot in the surface burner indicator shows which surface burner is turned on by that knob.
Control knobs must be pushed in, then turned to the LITE position. The clicking sound is the ignition sparking. To stop the clicking sound after the burner lights, turn the control knob back to a desired setting. The control knob has stops for HI, MED and LOW, however it can be set anywhere between HI and OFF. Do not cook with the control in the LITE position.
In Case of a Prolonged
Power Failure
Surface burners can be manually lighted. Hold a lighted match near a burner and turn the control to the LITE position. After the burner lights, turn the control to the desired setting.
See the �Cooking Guide� for important utensil information. used to the settings, use the following as a guide.
Use LITE to light the burner. After the burner lights. turn control back to a desired setting Do not cook with the control in the LITE position. Use a high setting to start cooking or to bring liquids to a boil. Use a medium setting to start cooking or to fry chicken or pancakes; for gravy, puddings and icing or to cook large amounts of vegetables
Until you get
Use a low setting to keep foods warm until ready to serve
