ing all traces of dirt and contamination. 4. Remove the fader track (G) by slowly withdrawing from the unit. Place fader track on desk or working surface with black contacts facing upwards. If necessary, the track can be washed in warm water, wiped gently then dried thoroughly using a dry cloth. Use a lint free cloth or swab to wipe the tracks and check for marks along the track. (Note: Lint free cloth should be used to avoid dust/fibers being deposited on the track). If the track appears excessively worn, or if cleaning does not improve operation, replacement may be necessary. 5. Examine the center channel of the fader body and if dirty, clean using cotton buds. 6. Re-assemble and lubricate the fader as follows: 6.1) Secure the end block and guide rail onto the fader body. 6.2) Insert track into the fader body. 6.3) Insert slider assembly onto guide rail and into the fader body. Move slider from end to end to disperse the oil evenly. Carefully wipe away any excess oil using a tissue or cloth. 6.4) Lubricate the guide rail by placing one drop of silicon liquid oil onto the guide rail (F). 6.5) Insert dust cover. 6.6) Insert fader track back into fader body with wires coming out open end of fader body. 6.7) Secure the remaining end block ensuring that the track wires (I) are not pinched between the end block and fader casing. 7. Once assembled, move the slider from end to end to ensure operation is smooth. 8. Attach fader to fader plate. (NOTE: As noted earlier if you do not want to change positioning of fader, keep the 2 fader plate screws loose and shift the fader until it is aligned with the marks you created in step 1, then tighten fader plate screws.)
I G D C A