WHIRLPOOL SNAC8LW
Instrukcja Obsługi

Utensils
Microwave-safe
� � � � � � Non-recycled paper Glass or ceramic Plastic Wood Shells Natural fiber cloth

Care and Cleaning
Oven Light

Caution
To avoid electrical shock hazard unplug power cord or open circuit breaker to microwave oven before replacing light bulb. After replacing light bulb, reconnect power. Tools � Protective gloves � Phillips screwdriver

Not Microwave-safe
� � � � � � � Recycled paper Metal Newspapers Grocery bags Aluminum foil Metallic trimmed china Lead crystal

Utensil Check Test
Use following test to check if utensils are microwave-safe. 1. Place glass measuring cup of water next to empty dish to be tested in unit. 2. Heat on full power for one minute. 3. Check temperature of tested dish. � If dish remains cool and water is hot, dish is microwave-safe. � If dish is slightly warm, use for short term cooking only. � If dish is hot and water is cool, do not use. Dish remains cool if not absorbing microwaves and microwaves are being absorbed by water. Dish becomes hot if absorbing microwaves.

Caution
Wear gloves to protect hands should bulb break. If hot, allow bulb to cool.

To change oven light: 1. Disconnect power supply to oven. 2. Remove screw from and open cover on access door on back of oven. 3. Remove bulb by turning counterclockwise, being careful not to burn fingers or break bulb. � Replace bulb with 15 watt, 120 volt candelabra base bulb.

4. Close access door and replace access screw. 5. Plug in oven.

9