JBL SP5
Instrukcja Serwisowa

Technical Manual

SP5 Soundpoint Series
ACOUSTIC & ELECTRICAL SPECIFICATIONS: � Nominal Impedance 8 ohms � Max Amp Power 60 watts* � Frequency Response 45Hz � 20kHz (�10dB) � Sensitivity 87dB (2.83V @ 1 meter) � Crossover Frequency 3,000Hz SYSTEM COMPONENTS: � Grille, Gray � Low-Frequency Transducer AURAL SWEEP TEST SPECIFICATIONS: � System Aural Sweep Test 6.0V Input 40Hz to 20kHz � L.F. Aural Sweep Test 5.0V Input 40Hz to 4kHz � H.F. Aural Sweep Test 2.83V Input 2kHz to 20kHz PHYSICAL SPECIFICATIONS: � Plate Size (W x H) 7-1/2" x 10" (191mm x 254mm) � Mounting Cutout Size (W x H) 6-1/8" x 8-11/16" (156mm x 221mm) � Mounting Depth 3-3/4" (95mm) � Weight 7 lb (3.2kg) Sold in pairs WARRANTY: � Refer to Warranty Statement packed with each product. * The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.

�

DC Resistance � High-Frequency Transducer

DC Resistance � Crossover Network

129-0004 5-1/4" (133mm) titaniumlaminate cone w/rubber surround (330-0131) 5.6 ohms ±10% 1" (25mm) titanium-laminate dome, w/swivel mount (300-0080) 7.5 ohms ±10% 340-0119

PACKAGING

Legend on Page 2

9 13 10

11

L1 1.6mH C1 14uF 100V

GRN

.250

BLK R1 3.9 ohms 10 watts C2 6uF 100V

.205

YEL .110 R2 5.1 ohms 10 watts BLK

12

L2 0.5mH

.110

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, New York 11797

Rev 4 1/06

SP5 SoundPoint Series