Selecting, Editing and Storing Programs 1. 2. 3. 4. In PLAY mode, use the Program Up and Down buttons, footswitches or VALUE knob to select a program. Turn the EFFECT knob to the module or parameter you wish to edit. Turn the VALUE knob to change the value of the module or parameter. To store your changes, press the VALUE knob and then turn the knob to select a store location. Press the VALUE knob again to store the program.
Using the Tuner 1. In PLAY mode, activate the tuner by pressing the Program Up and Down buttons or both footswitches at the same time to enter Bypass mode, or hold them down for more than half a second to enter Mute mode. Play the open string you wish to tune. Use the following guide when tuning:
Visual Guide to Tuning The bottom four segments rotate counterclockwise if pitch is low. The top four rotate clockwise if pitch is high. An 8 means pitch is in tune. Low In tune High
2.
The twelve possible pitches (a decimal point indicates a sharp):
