JVC SP-MXKB25
Instrukcja Obsługi

Connection/Anschlu�/Raccordement/Aansluiting Conexión/Collegamento/Ansluiting/Tilslutning/Liitäntä
Right speaker Rechter Lautsprecher Enceinte de droite Rechter spreker Altavoz derecho Altoparlante destro Höger högtalare Højre højttaler Oikea kaiutin Left speaker Linker Lautsprecher Enceinte de gauche Linker spreker Altavoz izquierdo Altoparlante sinistro Vänster högtalare Venstre højttaler Vasen kaiutin

Precautions
Before connecting: � Make sure to match the polarity (ª and ·) when connecting the speaker cords. � Turn off the power to the amplifier before connecting the speaker system; otherwise, the speakers may be damaged. � The impedance of each speaker is 6 �. If this does not match with the speaker impedance range indicated on the amplifier, you cannot connect this system to the amplifier. � The maximum power handling capacity of the SP-MXKB25 is 30 W. Excessive input will result in abnormal noise and possible damage. Daily operations and maintenance: � Be sure to turn down the volume level on the amplifier to prevent unwanted noise before performing following operations: � Turning on or off other components � Operating the amplifier � Tuning FM stations � Fast-forwarding a tape � Continuously reproducing high frequency oscillation or high pitch electronic sounds � Connecting or disconnecting a microphone � When using a microphone, do not aim it at the speakers or use it near the speakers; otherwise, the howling which occurs may damage the speakers. � Before replacing the cartridge, always turn off the power both to the amplifier and to the turntable; otherwise, the clicking noise may damage the speakers.

Amplifier output terminals Ausgang des Verstärkers Bornes de sortie de l�amplificaterur Uitgangsaansluitengen van de versterker Terminales de salida de amplificador Terminali de uscita dell�amplifcator Utgångar på förstärkaren Forstærkerudgangsbøsninger Vahvistimen ulostuloliittimet

SPECIFICATIONS
Type Speakers Woofer Tweeter Power Handling Capacity Impedance Frequency Range Sound Pressure Level Dimensions (W � H � D) Mass : 2-way 2-speaker Bass-Reflex Type : 13.0 cm cone � 1 : 5.0 cm cone � 1 : 30 W :6 � : 65 Hz�20 000 Hz : 86 dB/W·m : 208 mm � 323 mm � 264 mm : 3.0 kg each

Design and specifications subject to change without notice.

2