Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 78 (kliknij aby zobaczyć)
78
EN
TROUBLESHOOTING
Playback (DV Deck)
The DV deck cannot be operated. The DV deck is not selected. ] Press DV/HDD/DVD on the unit repeatedly or DV on the remote so that the DV lamp lights up on the unit. The tape will not rewind or fast-forward. The tape is already fully rewound or fast-forwarded. ] Check the cassette. The playback picture does not appear while the tape is running.
� The TV is not set to the AV mode. ] Set the TV to the AV mode. � �
Recording (HDD Deck)
TV broadcasts cannot be recorded.
�
AL-1B or AF-1B has been selected as the input mode. ] Set to the desired channel. Camcorder recording is not possible.
� The camcorder has not been properly connected. ] Confirm that the camcorder is properly connected. � The input mode is not correct.
] Set the input mode to AF-1B. (A pg. 62)
Recording (DV Deck)
During recording, the tape does not run. The DV recording lamp lights up on the unit.
� The unit is in the Record Pause mode. ] Press I to resume recording.
Noise appears during visual search.
�
This is normal.
The playback picture is blurred or interrupted while TV broadcasts are clear or AUSE CLEANING CASSETTEB message appears on the screen. The video heads may be dirty. ] Use a dry cleaning cassette M-DV12CL, or consult your JVC dealer.
�
Recording cannot be done.
�
There is no cassette loaded, or the cassette loaded has had its erase protection switch set to ASAVEB.
] Insert a Mini DV cassette, or set the erase protection switch set to ARECB. Camcorder recording is not possible.
� The camcorder has not been properly connected. ] Confirm that the camcorder is properly connected. � The input mode is not correct. ] Set the input mode to AF-1B or ADVB.
Recording (DVD Deck)
The desired program cannot be recorded. The channel position does not correspond to that in the receiving area. ] Set the correct channel position for the receiving broadcast. (A pg. 22) Recording cannot be made.
� �
The tape is automatically rewound, then the unit is shut off.
� The end of the tape was reached during recording. ] The program may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire program.
No disc or a disc not being compatible with the unit is loaded.
] Load a recordable disc on the unit. (A pg. 7) � The disc loaded is not formatted. ] Format the disc. (A pg. 74) � A finalized DVD-R disc is loaded. ] Recording cannot be made on finalized discs. Load a recordable disc on the unit. � The disc is full or does not have enough space for the title to be recorded. ] Clear unnecessary titles on the disc or load a blank disc. (A pg. 52) � The DVD-RAM disc loaded has had its protect tab slid to the protect position. ] Release the protect tab. (A pg. 10)
Audio dubbing is not possible. ADV AUDIO RECB had been set to A16BITB at the original recording. ] Set ADV AUDIO RECB to A12BITB at the original recording. � The tape speed had been set to LP at the original recording. ] Set the tape speed to SP at the original recording. Monitoring the audio dubbed sound is not possible during audio dubbing. ] This is normal. Monitor the sound using the connected devices.
�