|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
Front
Surround
Center
ORDER NO.
RRV3675
SPEAKER SYSTEM
S-ST232T
1.1 CS Assy (Front)
The grille assy is attached to the cabinet by 9 external screws. To detach it, first remove 3 screws of connection part with the base assy. Next remove 2 screws of the cosmetic plate assy lower side. Next remove 7 screws of the cabinet. Then carefully disconnect the wires of the woofer mounted on the grille assy and input terminal. To detach the cosmetic plate assy, remove 2 screws of connection part with the grille assy. The woofer is attached to the grille by 4 internal screws. To detach it, first unfasten those screws. Next remove the cable. When attaching it, face its terminal upward. The tweeter is attached to the baffle by adhesives. To exchange the tweeter, do it with the grille assy. The cosmetic plate assy is attached to the grille assy by 2 internal screws. To detach it, first remove the grille assy. Next unfasten those screws.
XCN5
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.2 CS Assy (Surround)
The grille assy is attached to the cabinet by its bosses. To detach it, pry it open by inserting a flat blade screw driver into lower slot. To attach it, press it to the inner baffle. The speaker unit is attached to the inner baffle by 4 external screws. To detach it, first remove the grille assy. Next unfasten those screws, and remove the cable. When attaching it, face its terminal downward.
1.3 CS Assy (Center)
The grille assy is attached to the cabinet by 8 external screws. To detach it ,unfasten those screws. The speaker unit, together with the grille assy, is attached to the cabinet by 4 external screws. To detach it, first remove the grille assy. Next remove the cabinet. Then remove the cable. When attaching it, face its terminal toward the input terminal.
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2007
T � ZZK SEPT. 2007 Printed in Japan
|
|
|
> |
|
