6: Adjusting the speaker levels and balance
Getting Started
(TEST TONE)
Adjust the speaker levels and balance while listening the test tone from your listening position. Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency centered at 800 Hz.
1 Press ?/1 on the remote to turn on the
receiver.
2 Press TEST TONE on the remote.
�T.TONE� appears in the display and the test tone is output from each speaker in sequence.
3 Adjust the speaker level and balance
using the LEVEL menu so that the level of the test tone sounds the same from each speaker.
Tips
� To adjust the level of all speakers at the same time, press MASTER VOL +/� on the remote or turn MASTER VOLUME on the receiver. � You can use the jog dial on the receiver only for the adjustment.
