SONY STR-DB795
Instrukcja Obsługi

About the indications in the display
1
SW

2
LFE

3

4

5

6

7

8

SP A ; DIGITAL EX ;PRO LOGIC IIx DTS-ES NEO:6 RDS MEMORY SP B SLEEP OPT COAX 96/24 D.RANGE EQ STEREO MONO DIRECT

LCR SL S SR SBL SB SBR

qf

qd qs

qa

q;

9

qg
A SW: Lights up when sub woofer selection is set to �YES� (page 17). While this indicator lights up, the receiver outputs the LFE signal recorded on the disc or generates a low frequency signal for output to the sub woofer. This indicator does not light during the 2CH STEREO mode. B LFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. C SP A/SP B: Lights up in accordance with the speaker system being used (A or B). Turns off when speaker output is turned off or when headphones are connected. D ; DIGITAL EX: Lights up when the receiver is decoding signals recorded in the Dolby Digital format. E ; PRO LOGIC IIx: �; PRO LOGIC� lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. �; PRO LOGIC II� lights up when the Pro Logic II Movie/Music/Game decoder is activated. �; PRO LOGIC IIx� lights up when the Pro Logic IIx Movie/Music/Game decoder is activated. However, these indicators do not light up if both the center and surround speakers are set to �NO� and you select a sound field using the A.F.D. button.
Note

F DTS-ES 96/24: �DTS� lights up when DTS signals are input. �DTS-ES� lights up when DTS-ES signals are input. �DTS 96/24� lights up when the receiver is decoding DTS 96 kHz/ 24 bit signals.
Note

When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to �ANALOG� (page 35).

G NEO:6: Lights up when DTS Neo:6 cinema/ music mode decoding is activated. H Tuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 22�25 for tuner operations. I DIRECT: Lights up when the ANALOG DIRECT function is activated. J EQ: Lights up when the equalizer is activated. K D.RANGE: Lights up when dynamic range compression is activated (page 40). L COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal. M OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal. N SLEEP: Lights up when sleep timer is activated.

Amplifier Operation

Dolby Pro Logic IIx decoding does not function for DTS format signals and for signals with a sampling frequency of more than 48 kHz.

continued

27GB