Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
Performing initial setup operations
Before using your receiver for the first time, adjust SET UP parameters so that the receiver correspond to your system. For the adjustable parameters, see the table on page 51. See pages 17�22 for speaker settings and pages 40, 41 for other settings.
When placing surround speakers behind you
B A 45° A
C 90°
C
Multi channel surround setup
For the best possible surround sound, all speakers should be the same distance from the listening position (A). However, the receiver lets you to place the center speaker up to 5 feet closer (B), the surround speakers up to 15 feet closer (C) and the surround back speakers up to 15 feet closer (D) to the listening position. The front speakers can be placed from 3 to 40 feet from the listening position (A). You can place the surround speakers either behind you or to the side, depending on the shape of your room (etc.). You can use the center and surround back speakers as surround back left and right speakers.
When placing surround speakers to your side
B A 45° A
D
20°
Note
Do not place the center speaker farther away from the listening position than the front speakers.
Tip
When setting up the surround back speaker, set the speaker at least 1 meter behind the listening position. It is recommended to place the speaker at an equal distance from the surround left and right speakers. If there is no space behind the listening position, set the speaker above the listening position by placing it on a stand or hanging it from the ceiling. To prevent speaker damage or injury in case the speaker falls, make sure that it is properly fixed in place.
Specifying the speaker parameters
1 Press SET UP. 2 Press the cursor buttons (
or
) to
select the parameter you want to adjust.
3 Turn the jog dial to select the setting
you want.
