|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
;
Instrukcja Serwisowa jest kompletna i czytelna. Dziękuję!
STR-K670P SECTION 2 TEST MODE
FACTORY PRESET MODE
� � All preset contents are reset to the default setting. Procedure: While depressing the PRESET TUNING� and the DIMMER buttons simultaneously, press the power ?/1 button to turn on the main power. The message �FACTORY� appears and switch off the set. While depressing the PRESET TUNING� and the DIMMER buttons simultaneously, press the power ?/1 button again. The message �FACTORY� appears and the present contents are reset to the default values.
SOUND FIELD CLEAR MODE
� The preset sound field is cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: While depressing the 2CH button, press the power ?/1 button to turn on the main power. The message �SF. CLR.� appears and initialization is performed.
�
SOFTWARE VERSION DISPLAY MODE
� � The software version is displayed. Procedure: While depressing the PRESET TUNING� and the I buttons simultaneously, press the power ?/1 button to turn on the main power. The model name, destination and the software version are displayed.
AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE
� � Either the 9 kHz step or 10 kHz step can be selected for the AM channel step. Procedure: Set the FUNCTION to AM. Turn off the main power. While depressing the TUNING+ button or the PRESET TUNING+ button, press the power ?/1 button to turn on the main power. Either the message �9 k STEP� or �10 k STEP� appears. Select the desired step. This mode is only for US, Canadian, Australian and E models.
KEY CHECK MODE
� � Button check Procedure: While depressing the A.F.D and the I buttons simultaneously, press the power ?/1 button to turn on the main power. �REST 25� appears. Every pressing of any button other than ?/1 counts down the buttons. The buttons which are already counted once are not counted again. When all buttons are pressed �REST 00� appears. When MASTER VOLUME is rotated in clockwise direction, �VOL MIN�, �VOL 1� to �VOL 48�, �VOL MAX� appear.
FLUORESCENT INDICATOR TUBE TEST MODE
All fluorescent segments are tested. When this test is activated, all segments turn on at the same time, then each segment turns on one after another. � Procedure: While depressing the PRESET TUNING� and the AM buttons simultaneously, press the power ?/1 button to turn on the main power. 1. All segments turn on.
SW L SL
LFE
SP A DDDIGITALEXDDPRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS MEMORY SP B SLEEP OPT COAX MULTI CH IN 96/24 D.RANGE EQ STEREO MONO DIRECT
�
AUTO BETICAL MODE
� This mode is installed in the Europe models only. When this mode is used, the receiver scans the broadcasts that can be received by the tuner, and sets up the broadcasts. Be sure to start scanning after connecting the antenna. Procedure:
C S
R SR
SBL SB SBR
dB kHz mft. MHz
�
2. Press the VIDEO 1 button, confirm display.
SW L S SB
LFE
SP A DDDIGITALEXDDPRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS MEMORY SP B SLEEP OPT COAX MULTI CH IN 96/24 D.RANGE EQ STEREO MONO DIRECT
1. Check that the antenna is connected. 2. Press the ?/1 button to turn on the power while pressing the MEMORY button.
R
dB kHz mft. MHz
CHANGE COMMON MODE
� � This mode is command mode changed to AV 1 or AV2. Procedure: While depressing the ENTER button, press the power ?/1 button to turn on the main power. Either the message �C.MODE.AV 1� or �C.MODE.AV 2� appears.
3. Press the VIDEO 1 button, confirm display
SP A DDDIGITALEXDDPRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS MEMORY SP B SLEEP OPT COAX MULTI CH IN 96/24 D.RANGE EQ STEREO MONO DIRECT
C SL SBL SR SBR
kHz mft. MHz
SHIPMENT MODE
� � All preset contents are reset to the default setting. Procedure: While depressing the A.F.D. and the AM buttons simultaneously, press the power ?/1 button to turn on the main power. �CLEARED� appears.
4. Press the VIDEO 1 button, All segments turn off. 5. Every pressing of the VIDEO 1 button turns on each segment one after another in the same order. (Not only the VIDEO 1 button, but also the other buttons such as VIDEO 2 , DVD , SA-CD/CD , FM and AM can be used.)
10
|
|
|
> |
|
