SONY STRK870P
Instrukcja Serwisowa

STR-K870P

Remote Button

Operations

Function

O qa

VCD player/ LD player/

Returns to the previous menu or

Selecting the command mode of the remote
Set the remote command mode using the RM SET UP button and the remote command mode buttons.

DVD player/ exits the menu. Blu-ray disc recorder/Hard disc recorder/ PSX/Satellite tuner V/v qa B/b qa V/v/B/b qa Receiver Receiver Selects a menu item. Adjusts or changes the setting.

Selecting the command mode
You can switch the command mode (AV1 and AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. To change the command mode of the receiver, see page 53.
Press AV1 (or AV2) while holding down RM SET UP.

VCR/ Selects a menu item. DVD player/ Blu-ray disc recorder/Hard disc recorder/ PSX/Satellite tuner

The indicator flashes once (twice for AV2) , then the command mode switches.

Notes

� The AUX, MULTI CH and 12 buttons on the remote are not available for receiver operation. � Some functions explained in this section may not work depending on the model. � The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. � When you press input buttons (VIDEO1, VIDEO2, VIDEO3 or DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press TV/VIDEO button to switch the input mode of the TV. � To activate the buttons with orange printing, press ALT first before pressing the buttons.

To check the command mode of the remote
Press RM SET UP. You can check the remote by the indicator.
Mode Indicator flashes

AV1 AV2

once twice

To reset the remote to factory settings
Press ?/1, AV ?/1 and MASTER VOL � at the same time.

The indicator flashes 3 times, then goes off.

10