STUDIO PRECISION USER GUIDE
6 Low Frequency Trim Control This control can be used to tailor the low frequency response of the system to your room. Turn the control clockwise to increase the low frequency response; counter-clockwise to decrease it. The center detent indicates the control�s �flat� position.
5
7 Power Switch Push the left side of the switch to turn the amplifiers on ( | ); push the right side of the switch to turn them off. When the amplifiers are on, the green LED located in the metal trim ring on the front of the monitor will illuminate. 8 Power Connector This connector accepts the detachable AC line cord. Use the line cord supplied with your monitor, and make sure it is fully seated into the Power Inlet connector. For safety reasons, do not attempt to defeat the line cord�s ground connection.
