|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Using the VIDEOPLUS+ Feature 5(SV-665B/SV-265B Only)
GB
Modifying VIDEOPLUS+ Programming 5(V-665B/SV-265B Only)
GB
Before presetting your VCR: x Switch on both the television and your VCR x Check that the date and time are correct x Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset. If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press MENU a second time to confirm. If you wish to... Select an input source other than the tuner (AV1, AV2 or AUX 5(SV-665B only)) Then...
x Press the � or � buttons, until the PR selection flashes. x Press the INPUT button one or more times to change the
SPEED
DUB
TV/VCR
TIMER
1
1 2
Press the TIMER button. Result: The TIMER METHOD is displayed.
�
input source selection. Result: The programme number is replaced by:
Press the corresponding option is selected.
or � buttons, until the VIDEOPLUS
� The AV1, AV2 or AUX 5(SV-665B only)
source using the INPUT button for a satellite tuner or external video source
** TIMER METHOD ** STANDARD VIDEOPLUS
3
Press the �¤button to select VIDEOPLUS. Result: A message is displayed to allow you to enter the VIDEOPLUS+ code.
�
Record a programme every day (Monday to Sunday) at the same time Record a programme every week on the same day and at the same time
The input source must be selected before changing any other value.
�
END: MENU
If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 29 if you wish to cancel a preset recording.
x Press the � or � buttons, until the DAY selection flashes. x Press the � or � buttons, until the DLY (Daily) value is
displayed.
x Press the � or � buttons, until the DAY selection flashes. x Press the � or � buttons, until the W- (Week) value is
� �
�
4
Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine.
�
VIDEOPLUS CODE ---------
If you wish to correct the VIDEOPLUS+ code that you are entering: x Press the � button until the digit to be corrected is cleared
x
displayed, followed by the required day. Example: W-SA (Weekly Saturday) Extend the recording time
x Press the � or � buttons, until the STOP selection flashes. x Press the � or � buttons to increase or decrease the stop
5
CODE:0-9 CORRECT:� END:MENU
Enter the correct digit Press the MENU button. Result: The information concerning the programme is displayed. Select the recording speed
time.
x Press the � or � buttons, until the recording speed selection
�
PR 1 ------
PROG
� �
��
1/JAN WED 21:28 DAY START� STOP V/P WE 1 12:00� 12:50SP ON ---- --:--�--:---- ---- --:--�--:---- ---- --:--�--:---- ---- --:--�--:---- ---- --:--�--:---- MENU
When using the VIDEOPLUS+ function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the � or � buttons. Refer to the following page if: x The programme number or times flash x You wish to modify the programme Select the PDC recording
flashes. x Press the � or � buttons until the correct indication is displayed:
� AUTO (Auto Tape Speed Select) : see page 28 � SP (Standard Play) � LP (Long Play)
x Press the � or � buttons, until the V/P selection flashes. x Press the � or � buttons until the �ON� indication is displayed.
6 7 8
If the programme and times are correct, press the MENU button. Press the VCR STANDBY/ON (STANDBY/ON) button to activate the timer. Refer to page 29 if you wish to: x Check that your VCR has been programmed correctly x Cancel a preset recording
�
5(SV-265B)
DELETE:CLR/RST
5(SV-665B)
Do not select PDC unless you are sure the programme you wish to record is broadcast with PDC. If you do set PDC ON (by selecting �ON� in the right - hand column on the screen), then you must set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer recording won�t take place.
�
VCR STANDBY/ON STANDBY/ON
7
S
7
S
The numbers next to each TV programme listing are VIDEOPLUS+ code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the VIDEOPLUS+ code for the programme you wish to record.
SH
SH
� VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+ system is manufactured under licence from Gemstar Development Corporation.
26
27
|
|
|
> |
|
