Connecting to PC (continued)
3
Connect this unit to the power plug with the AC adaptor 1.
1
4
Connect this unit to the PC with the supplied USB cable 2.
2
� [ACCESSING PC] indication appears. � If the [ACCESSING PICTBRIDGE/ PTP] indication is displayed, disconnect the USB cable and then confirm the setting in Step 2.
� Do not disconnect the USB cable or the AC adaptor from this unit or remove the card while the Card Access Lamp on this unit is blinking. The software may not operate properly or the data being transferred may be damaged. � Do not use any other USB cables except the supplied one. � Do not disconnect the AC adaptor while connecting to the PC. � When the PC connection mode on this unit (displayed as [ACCESSING PC]) is not canceled, even if you turn the PC off, disconnect the USB cable. � If the PC is in the power saving mode while connecting to this unit, the PC may not recognize this unit when recovering from the power saving mode. In this case, restart the PC after you disconnect this unit. (When you connect this unit to the PC and use it for a long time, cancel the setting in the power saving mode beforehand.)
