WHIRLPOOL TAWL670BN0
Instrukcja Obsługi

If You Need Assistance Or Service
1. Before calling for assistance ...
Is your water turned on?

qPROBLEM Washer will not fill

Is the power cord plugged

in?

Have you blown a fuse or tripped the circuit breaker?

If you need more help, check the chart below.

CHECK

THE FOLLOWING into a live circuit with proper Has a time-

Is the power cord firmly plugged voltage?

Has a household fuse blown or circuit breaker tripped? delay fuse been used? Are both hot and cold water faucets open? Are the water supply hoses kinked? Is the Cycle Control Knob set and pulled out? Washer does not spin Is the lid closed? Is the power cord firmly plugged voltage?

into a live circuit with proper Has a time-

Has a household fuse blown or circuit breaker tripped? delay fuse been used? Washer stops during a cycle Washer pauses briefly at different pauses are normal. Is the power cord firmly plugged voltage?

times in each cycle. These into a live circuit with proper tripped? Has a time-

Has a household fuse blown or circuit breaker delay fuse been used? Washer fills and drains without running Washer drains during wash and rinse cycles, or water siphons out 22

Is the Cycle Control Knob pointing to a number in the cycle? Adjust the drain hose so that it is higher than the water level in the washer.