...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
TC-22LR30
5.10. HOW TO REMOVE A DISC WHEN EJECT FAIL
When installing each part, be careful not to over tighten the Screws. When using an electric driver, use one with an adjustable torque range. Using too much torque may damage the screw head so that it cannot be tightened.
5.10.1. How to remove a Disc (By Key Operation)
Press STOP and CH UP Buttons on the unit together for 5 seconds during Power Off condition via the Remote Control Unit. The operation of Open Tray is performed and the Unit goes in Power Off condition.
5.10.2. How to remove a Disc (By Manual Operation)
1. Lay down a soft cloth to protect the LCD Panel surface and place the unit so the Front Screen is face down on the cloth.
2. Remove 11 screws fixing Bottom Case of DVD portion and then remove the Bottom Case.
If the DVD Door happens to come off when installing the Bottom Case of the DVD portion, install the DVD Door as follows. a. Install the spring on the DVD Door and then install the DVD Door into the Bottom Case of the DVD portion. b. Fix the DVD Door Spring on the Spring Stopper Rib as shown below.
