Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
5.3.
Hotel mode
item Mode Input Function Select hotel mode off/on Select input signal modes. Set the input, when each time power is switched on. Selection: -/RF/Component1/Component2/HDMI1/ HDMI2/HDMI3/Video1/Video2/PC Channel � Off: give priority to a last memory. Select channel when input signal is RF. Set the channel, each time power is switched on. Selection: Any channel number or [-]. [-] means the channel when turns off. Adjust the volume when each time power is switched on. Range: 0 to 100 Adjust maximum volume. Range: 0 to 100 Restrict the OSD. Selection: Off/Pattern1 � OFF: No restriction � Pattern1: restriction Select front key conditions. Selection: Off/Pattern1/All � Off: altogether valid. � Pattern1: only input key is valid. � All: altogether invalid. Select POWER-ON/OFF condition when AC power cord is disconnected and then connected. OFF: The same condition when AC power cord is disconnected. ON: Forced power ON condition.
1. Purpose Restrict a function for hotels. 2. Access command to the Hotel mode setup menu In order to display the Hotel mode setup menu, please enter the following command (within 2 second). [TV] : Vol. [Down] + [REMOTE] : TV/VIDEO (3 times) Then, the Hotel mode setup menu is displayed.
Volume
Vol. Max
OSD Ctrl
FP Ctrl
Pow Ctrl
3. To exit the Hotel mode setup menu Disconnect AC power cord from wall outlet. 4. Explain the Hotel mode setup menu
