Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 24 (kliknij aby zobaczyć)
USING THE SELF-CLEANING CYCLE
SETTING THE CONTROLS
1. Press SELF CLEAN.
The clean indicator light will light up. This will automatically set a 31�2-hour Self-Cleaning cycle. NOTE: There will be a 30-minute cool-down 1�2 hour before the cycle is over.
PRESS
SELF CLEAN
YOU SEE
ON
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or shorter than 31�2 hours, use the hour and minute pads to set the cleaning time you want. Press the �up� (s) or �down� (t) pad(s) until a time between 21�2-41�2 hours shows on the display.
PRESS
YOU SEE
ON
TIME
(example for 4 hours, 30 minutes)
� Use 21�2 hours for light soil. � Use 3 �2-4 �2 hours for average to heavy soil.
3. Start the oven.
NOTE: The on and heat indicator lights will light up.
1 1
PRESS
START
ENTER 5 SEC
YOU SEE
ON
4. After Self-Cleaning cycle starts:
The door locked indicator light will light up when the oven door locks. NOTE: If you open the door before starting the Self-Cleaning cycle, �door� will show on the display. If you do not close the door within 5 minutes, the cycle will be canceled.
YOU SEE
ON
5. After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures: The clean, door locked, and on indicator lights will go out. Press OFF/CANCEL to clear the display.
